Service Door

Flip-Flap Service Doors for Air-Conditioned Rooms

The Frigo System flip-flap service door is a semi-insulated, self-closing door designed for busy passages between air-conditioned working areas. It can be installed on a sandwich panel or brick wall.

Important: This door is not for cold rooms. It is not suitable where a hermetic or thermal seal is required. For cold rooms and freezers, choose a hinged or sliding door.

Operating Conditions

ConditionValue
Minimum working temperatureAbove +12 °C
Temperature difference between the two sidesBelow 12 °C
Relative humidityBelow 60%

Technical Specifications

FeatureValue
Leaf40 mm, two pre-painted sheet metal skins with high-density polyurethane
ColourWhite RAL 9010
Hinges2 plastic spring hinges per leaf, 90° doorstop
GasketCrush-proof gasket on the vertical edges
FrameAnodized aluminium frame and counterframe
EdgeRubber finger protection

Sizes: Available as single or double leaf. Overall frame width is clear passage width + 143 mm, and overall frame height is clear passage height + 70 mm.

Options: 30×60 cm transparent polycarbonate window and kick plate.

Applications

  • Air-conditioned working areas
  • Packing and production halls above +12 °C
  • Between supermarket sales areas and back-of-house
  • Commercial kitchens
  • Warehouse passages
  • Hospital and laboratory corridors

Frequently Asked Questions

Can this door be used on a cold room?
No. For cold rooms and freezers, choose a hinged or sliding door.

Does the door close by itself?
Yes, the spring hinges return the leaf to the closed position.

Should I choose a single or double leaf?
A single leaf suits personnel passages. A double leaf suits trolleys and wider passages.

Get a Quote